|
Laboratory/Portable
pH
Epoxy body combination
pH (part number starts with "S")
Sealed
reference half-cell (part number starts with "S"
or "SG" and ends with "R" or "RD")
Refillable reference
half-cell (part number starts with "S" or "SG"
and ends with "1R" or "1RD")
Glass body combination
pH (part number starts with "SG"and ends with
"C" or "CD")
pH Detector/flow through
cell (FC45C, FC47C, FC49K, FC51K, 970282)
pHASE epoxy body
sealed (S1010CD, S1030CD)
pHASE glass body sealed
(SG1050CD)
pHASE refillable/
Rapid Renew Epoxy Body (S1021CD)
pHASE refillable/
Rapid Renew Glass Body (SG1041CD)
3-in1 pH/Reference/ATC
electrodes (S290C, S291C, S292C, S294C,
S296C, S298C)
Industrial/Process
pH
Low
Cost Epoxy Body
Epoxy
body pH in 3/4" Nipple (S220C, S220CD)
Epoxy body pH in 1/2"
or 3/4" hex nipple (S260, S261, S262, S263, S265,
S267, S268, S269)
Epoxy body pH cartridge
type (S222C, S222CD)
Flat-Surface, Self-Cleaning
Submersion
(S650CD)
By-pass
(S645CD)
in-line
(3/4", 1", 2") (S660CD, S661CD, S662CD)
Insertion/Wet-tap
(S655CD)
Note: All electrodes in this category require cable assembly and
mounting hardware below
Cable Assemblies and Mounting Hardware
Submersible without temperature
compensation (S653)
Submersible WITH temperature
compensation (S653TC)
In-line WITH temperature compensation for model S222C/CD (FC75TC)
In-line without temperature compensation (FC66P, FC67P,
FC68P)
In-line WITH temperature
compensation (FC66TC, FC67TC, FC68TC)
By-pass CPVC without temperature
compensation (FC60C)
By-pass
CPVC WITH temperature compensation (FC60TC)
By-pass PVDF(kynar) without Temp Comp (FC60K)
By-pass PVDF (kynar)
WITH Temp Comp (FC60TK)
Insertion assembly without
Temp Comp (S675, S676, S677, S675K)
Insertion assembly WITH Temp Comp (S675TC, S676TC, S677TC,
S675TK)
Industrial/Process
pH Accessories
pH/ORP Simulator (C110)
External Ground Loop Interrupt
Box (GLE-1)
TX100 pH/mV transmitter
(TX100)
|
