pH Electrode Instructions

Laboratory/Portable pH

• Epoxy body combination pH (part number starts with "S")
• Sealed reference half-cell (part number starts with "S" or "SG" and ends with "R" or "RD")
• Refillable reference half-cell (part number starts with "S" or "SG" and ends with "1R" or "1RD")
• Glass body combination pH (part number starts with "SG"and ends with "C" or "CD")
• Calomel-Free Refillable pH (part number ends with "CIT")
• Calomel-Free Sealed Reference half-cell (part number ends with "0-RIT")
• Calomel-Free Refillable Reference half-cell (part number ends with "1-RIT")
• pH Detector/flow through cell (FC45C, FC47C, FC49K, FC51K, 970282)
• pHASE epoxy body sealed (S1010CD, S1030CD)
• pHASE glass body sealed (SG1050CD)
• pHASE refillable/ Rapid Renew Epoxy Body (S1021CD)
• pHASE refillable/ Rapid Renew Glass Body (SG1041CD)
• 3-in1 pH/Reference/ATC electrodes (S290C, S291C, S292C, S294C, S296C, S298C)

Industrial/Process pH

• S8000 Modular pH System
  S8000 Series (S8000 electrodes, EA adapters, EM electronic modules,FC800 flow cell, and FC801 adapter)
• Low Cost Epoxy Body
  Epoxy body pH in 1/2" or 3/4" hex nipple (S260, S261, S262, S263, S265, S267, S268, S269)
  Epoxy body pH cartridge type (S222C, S222CD)
• Flat-Surface, Self-Cleaning
  Submersion (S650CD)
  By-pass (S645CD)
  in-line (3/4", 1", 2") (S660CD, S661CD, S662CD)
  Insertion/Wet-tap (S655CD)
• Note: All electrodes in this category require cable assembly and mounting hardware below
• Cable Assemblies and Mounting Hardware
  Submersible without temperature compensation (S653)
  Submersible WITH temperature compensation (S653TC)
  In-line WITH temperature compensation for model S222C/CD (FC75TC)
  In-line without temperature compensation (FC66P, FC67P, FC68P)
  In-line WITH temperature compensation (FC66TC, FC67TC, FC68TC)
  By-pass CPVC without temperature compensation (FC60C)
  By-pass CPVC WITH temperature compensation (FC60TC)
  By-pass PVDF(kynar) without Temp Comp (FC60K)
  By-pass PVDF (kynar) WITH Temp Comp (FC60TK)
  Insertion assembly without Temp Comp (S675, S676, S677, S675K)
  Insertion assembly WITH Temp Comp (S675TC, S676TC, S677TC, S675TK)

Industrial/Process pH Accessories

• Battery-Powered preamplifier (PHAMP-1)
• pH/ORP Simulator (C110)
• External Ground Loop Interrupt Box (GLE-1)
• TX100 pH/mV transmitter (TX100)